Tile SQ FT Calculator – Calculate Tile Area Online

November 9, 2026
Tile Square Footage Calculator

Calculate exactly how many tiles you need for your floor or wall. Enter the room size, tile dimensions, and waste percentage to get accurate results for tiles and boxes required.

1 Room / Area Size

Optional — leave 0 if none

2 Tile Details

Leave empty if you don’t know

Your Results

Net Area
0
sq ft
With Waste
0
sq ft
Tiles Needed
0
pieces (rounded up)
Boxes to Buy
—
enter tiles/box
One Tile Covers
0
sq ft
Waste Amount
0
sq ft

Buying tile is one of those jobs where a small math mistake costs real money. Order too few and you may find the next batch has a slightly different shade. Order too many and you are stuck with boxes you paid for and will never use.

A tile sq ft calculator takes the guesswork out of that step. You enter the size of the room and the size of your tile, and it tells you how much area you are covering, how many tiles to buy, and how many boxes that works out to. This guide explains the math behind it, so you can trust the numbers and double-check them yourself.

What Is a Tile SQ FT Calculator?

A tile sq ft calculator is an online tool that converts room measurements and tile dimensions into a shopping quantity. It does three jobs at once: it works out the area of the space, it works out how much area one tile covers, and it divides one by the other, with an allowance added for cuts and breakage.

You could do all of this on paper, and the rest of this article shows exactly how. The calculator simply removes the unit conversions, which are where most people slip up. Mixing inches with feet, or centimeters with meters, is the most common reason a tile order comes out wrong.

The calculator on this page works for floors and walls. For a wall, treat the wall width as the length and the wall height as the width. It handles one rectangular area at a time, so for an L-shaped room or several walls, run each section separately and add the results.

How to Calculate Tile Square Feet by Hand

The whole method comes down to four steps. Once you have done it once, it takes about two minutes.

  1. Measure the area. Measure the length and width of the space in feet. If you measured in inches, divide each by 12 to convert to feet.
  2. Multiply length by width. This gives the floor or wall area in square feet.
  3. Subtract areas you will not tile. Kitchen cabinets that sit on the floor, a bathtub, or a large built-in unit are examples.
  4. Add a waste allowance. Tiles get cut at edges and corners, and some break. Add a percentage on top of the net area.
Area (sq ft) = Length (ft) × Width (ft)
Tiles needed = Area with waste ÷ Area of one tile

Finding the area of one tile

Tile sizes are usually given in inches, centimeters, or millimeters, but your room area is in square feet. To compare them fairly, convert the tile area to square feet too.

For inch sizes, multiply the length by the width to get square inches, then divide by 144. There are 144 square inches in one square foot, because 12 × 12 = 144.

Tile size (inches)Area per tileTiles per sq ft
6 × 636 sq in = 0.25 sq ft4
12 × 12144 sq in = 1 sq ft1
12 × 24288 sq in = 2 sq ft0.5
24 × 24576 sq in = 4 sq ft0.25

If your tile is listed in centimeters or millimeters, convert to inches first: divide centimeters by 2.54, or millimeters by 25.4. The calculator does this for you through the tile size unit dropdown.

How to Use the Free Tile Calculator

The tool above is set up with an example already filled in (a 12 ft × 10 ft room with 12 × 12 inch tile), so you can see how it behaves before entering your own numbers. Results update instantly as you type, and there is no button to press.

Step 1: Enter the room or area size

Pick your unit first: feet, meters, or inches. Then enter the length and width. If part of the area will not be tiled, enter its size in the subtract field. Use the same unit as the room, but as an area. For example, if you chose feet, the subtract field is in square feet.

Step 2: Enter the tile details

Enter the tile length and width, then choose the tile unit: inches, centimeters, or millimeters. This unit is separate from the room unit, so you can measure a room in meters and still enter a tile size in millimeters.

Step 3: Choose a waste percentage

The default is 10 percent. There are also quick buttons for straight, offset, diagonal, and herringbone layouts, and you can type any value you like up to 50 percent.

Step 4: Add tiles per box (optional)

The box size is printed on the packaging or listed on the product page. If you enter it, the calculator also shows how many boxes to buy. If you leave it empty, you still get the tile count.

What the results mean

  • Net Area: the room area after subtracting any excluded sections.
  • With Waste: the net area plus your waste percentage.
  • Tiles Needed: the number of tiles to cover the area with waste, rounded up to a whole tile.
  • Boxes to Buy: the tile count divided by tiles per box, rounded up to a whole box.
  • One Tile Covers: the area of a single tile.
  • Waste Amount: the extra area added on top of the net area.

Tile Size and Square Feet Examples

Worked examples are the best way to check that a calculator is doing what you expect. Here are four, with every step shown.

Example 1: A 12 × 12 tile floor

Room: 12 ft × 10 ft. Tile: 12 × 12 inches. Waste: 10 percent.

Room area = 12 × 10 = 120 sq ft. One tile covers 144 ÷ 144 = 1 sq ft. With waste, 120 × 1.10 = 132 sq ft. Tiles needed = 132 ÷ 1 = 132.

132 tiles

Example 2: The same room with larger tile

Same room, same 10 percent waste, but with 12 × 24 inch tile.

One tile covers 288 ÷ 144 = 2 sq ft. Tiles needed = 132 ÷ 2 = 66. With 24 × 24 inch tile, one tile covers 4 sq ft, so you need 132 ÷ 4 = 33.

66 tiles (12 × 24) or 33 tiles (24 × 24)

Example 3: A room measured in meters

Room: 4 m × 3 m. Tile: 60 × 60 cm. Waste: 10 percent.

Room area = 4 × 3 = 12 m². One tile is 0.6 m × 0.6 m = 0.36 m². With waste, 12 × 1.10 = 13.2 m². Tiles needed = 13.2 ÷ 0.36 = 36.67, which rounds up to 37.

37 tiles

Example 4: A bathroom wall

Wall: 10 ft wide × 8 ft high. Tile: 12 × 24 inches. Waste: 10 percent.

Wall area = 10 × 8 = 80 sq ft. With waste, 80 × 1.10 = 88 sq ft. One tile covers 2 sq ft, so 88 ÷ 2 = 44.

44 tiles

Unit conversion reminder: 1 square meter equals about 10.76 square feet. So the 12 m² room in Example 3 is roughly 129 sq ft.

How Many Tiles Do You Need?

The answer is always the same formula: the area you are covering, plus waste, divided by the area of one tile. The part that deserves care is what you subtract and what you round.

Subtracting areas you will not tile

Say the 12 ft × 10 ft room from Example 1 has a built-in cabinet taking up 8 sq ft of floor. Net area = 120 − 8 = 112 sq ft. With 10 percent waste, that becomes 123.2 sq ft. With 1 sq ft tiles, you need 124 tiles, because you cannot buy 0.2 of a tile.

Be careful with doorways. If tile runs through the door opening, do not subtract it. Only subtract spaces where tile will genuinely not go.

Rounding up to full boxes

Tile is sold in boxes, so the real question is how many boxes to buy. If a box holds 10 tiles and you need 124, that is 12.4 boxes, so you buy 13. You will have 6 tiles left over, which is useful for future repairs.

Tip: Check the coverage printed on the box too. Many boxes list square feet per box, and that number is a handy way to cross-check your tile count.

Buying from the same batch

Tile is made in production lots, and shade can vary slightly between them. Buy everything you need in one purchase and check that the lot numbers on the boxes match. Keep a box or two spare after the job is done.

Tile Wastage and Cost Planning

Waste is the extra tile you buy to cover cuts, chipped pieces, and mistakes. It is not a sign you did anything wrong. Every tile job produces offcuts, because tiles at the edges of the room almost never fit whole.

The calculator offers four presets. These are common rules of thumb, not fixed standards, so treat them as a starting point.

LayoutPreset wasteWhy
Straight (grid)10%Fewest cuts, simplest pattern
Offset (brick)12%More cuts at the edges
Diagonal15%Every edge tile is cut at an angle
Herringbone20%Complex pattern, many cuts

You may want a higher allowance if the room has many corners, if you are a first-time tiler, or if the tile is fragile or expensive to replace. Large-format tile can also produce more waste in a small room, because each cut piece is big.

Estimating the cost

This calculator does not calculate price, but the math is simple once you have the quantity. Multiply the number of boxes by the price per box. Or multiply the area with waste by the price per square foot. Both methods should land close to each other. Remember to budget for adhesive, grout, spacers, and tools, which are separate from the tile itself.

Common Tile Calculation Mistakes

Mixing units. Entering the room in feet but the tile in centimeters without changing the tile unit will give a wrong result. Always check both unit settings.

  • Forgetting waste. Buying exactly the net area leaves you short the moment one tile breaks.
  • Adding too much waste. Adding 20 percent to a simple straight layout wastes money.
  • Using nominal sizes without checking. A tile sold as 12 × 12 may measure slightly less. Read the actual size on the box.
  • Ignoring grout lines. Grout joints take up a little space, and the calculator does not account for them separately. On most jobs the waste allowance covers the difference, but with wide joints or very small tile, it can add up.
  • Measuring once. Walls are rarely perfectly square. Measure at both ends of each wall and use the larger number.
  • Forgetting to round up. Always round tiles and boxes up, never down.

Limitations of this calculator

The tool assumes a rectangular area and a simple tile grid. It does not account for grout joint width, tile thickness, pattern layout planning, or irregular shapes. Treat the result as a solid estimate, and for complex jobs, talk to your tile supplier or installer before ordering.

Frequently Asked Questions

How do I calculate tile square feet?

Multiply the length of the area by its width, both in feet, to get square feet. Then divide by the area of one tile in square feet to see how many tiles fit. Add a waste percentage before you round up.

How many 12 × 12 tiles are in a square foot?

One. A 12 × 12 inch tile covers exactly 144 square inches, which is 1 square foot.

How many 24 × 24 tiles do I need for 100 square feet?

A 24 × 24 inch tile covers 4 square feet, so 100 ÷ 4 = 25 tiles before waste. With 10 percent waste, you need 110 ÷ 4 = 27.5, which rounds up to 28 tiles.

How much extra tile should I buy?

Ten percent is a common starting point for a simple straight layout. Diagonal and herringbone patterns need more because there are more cuts. The calculator lets you set any value up to 50 percent.

How do I convert square meters to square feet?

Multiply square meters by 10.7639. For square feet to square meters, divide by 10.7639.

Can I use this for wall tiles?

Yes. Enter the wall width as the length and the wall height as the width. For several walls, calculate each one and add the totals.

Does the calculator work for ceramic and porcelain tile?

Yes. The math depends on tile dimensions, not material. Ceramic, porcelain, and natural stone tiles all use the same calculation.

Final Thoughts

Measure carefully, convert units once, add a sensible waste allowance, and round up to full boxes. Do that and the order will be right. Use the calculator above for a fast answer, and use the worked examples here to check it. For tricky layouts, confirm the quantity with your tile supplier before you buy.

More free tools: try our Free Backlink Indexer to save and check your backlink URLs.